Metal fabric analysis: The outer layer of metal fiber for this radiation protection suit has been in the market for a long time. The product technology is mature. The stainless steel fiber with ion precision quenching technology is blended with cotton fiber and polyester fiber. It is resistant to washing, good air permeability and good radiation protection effect. The maintenance method of metal fiber: Metal fiber are resilient, if just fold will not damage, but the overlying will have certain damage, fatigue of the metal, resulting in metal structure damage, if don\’t wear metal fiber clothes hanging up best. 1. Can be directly washed, ordinary neutral detergent and detergent can be; 2. Hand wash, can be brushed with soft brush, avoid rubbing and machine washing; 3. After washing, you can\’t wring it, remove it directly from the water, and keep it cool; 4. You can\’t bleach your clothes with bleach, or wash your clothes with a detergent that contains bleach; 5. If the clothes appear pleated, the medium temperature irons, the temperature is not more than 110 degrees Celsius; 6. It is recommended not wash as much as possible in case of improper washing. Silver fabric analysis: The silver fiber radiation protection suit is a high-tech product obtained by permanently bonding silver to a fiber surface through a special technique. This structure not only makes the silver fiber maintain the original textile property, but also gives it all the The magical function of silver, the magical effect of silver fiber. Silver has the most effective antimicrobial properties. Silver fiber radiation-proof fabric made of silver-containing fiber using nanotechnology is the latest radiation-proof technology in the world after metal anti-radiation fiber cloth. It has the functions of radiation protection, anti-bacterial and anti-fouling, and is the production of radiation-proof clothing. Ideal fabric. Its anti-radiation effect is superior to radiation-proof fabric made of other metal materials, which can be worn close to the body and beneficial to the human body. The maintenance method of silver fiber: Silver fiber exposed to the air can not avoid oxidation, the fabric will be black or yellow, is a normal phenomenon, does not affect the shielding effect. To reduce the oxidation of washing, it is recommended to wear primer shirt,if do not use, it is recommended sealed. 1. It is recommended to wash with well water, mineral water, pure water; (Reason: Some tap water contains chloride ion, and if the chloride ion is excessive, it is easy to react with silver to reduce the damage to silver by alkali and chlorine) 2. Modest amount of neutral detergent, washing for a short time; (Do not use acidic detergent or laundry detergent) 3. Can not rub and washing machine wash. Can not be bleached, clothes washed, can not twist twist, picked up directly from the water dry in the ventilation, avoid exposure, do not recommend ironing. 4. It is recommended to wash or wash as little as possible to prevent improper washing effect of shielding Copper element fabric analysis: 1. Washable: In accordance with the national standard GB/T8629-20173G program washing ten times the shielding effectiveness of the average attenuation of less than 8%; 2, reflection + absorption dual shielding electromagnetic radiation; 3, has the role of permanently eliminating harmful bacteria; 4, skin-friendly and comfortable without stimulation. Applicable to the crowd: Electromagnetic radiation protective overcoat is suitable for people who work long hours or live in areas with large electromagnetic waves. such as computer, printer, radar contact, and wireless testing personnel as well as radio, telecommunications, communications, computer room, laboratory workers, etc. Electromagnetic radiation protective overcoat can protect against computer radiation, WIFI radiation, monitoring and radiation, protection against the radiation of the base station, radiation of the laboratory and other kinds of radiation. It is the ideal protective products for the army, banking, communications, electricity, schools, media, scientific research and other industries. [NOTE]: Cell phone signal does not equal cell phone radiation The mobile phone signal is a high-frequency microwave signal. It is the ability of the mobile phone itself to receive signals. It is basically harmless to the human body. The mobile phone signal has spread all over the world and is also supported by the countries of the world. The mobile phone can automatically search for signals. The steel in high-rise buildings is all steel. The elevator can receive signals, so the mobile phone initiative to search for signals has its own particularity. The protective effect of radiation protection suits cannot be based on the strength of mobile phone signals. My anti-radiation overcoats are protected against electromagnetic waves generated by the sudden increase or decay of electric currents in electronic components, and are not anti-cell-phone signals. Fabric test methods:
1.Fabric combustion method:
(1)Metal fiber Ignite the attached fabric sample and find that the burnt sample is a very clean and fine network metal, which indicates that the fabric is very good in material and can effectively shield the radiation.
(2)Silver fiber The attached fabric sample is ignited and burned to a black globule after being completely burned with fire. After being crushed by force, it can be turned into a powder, which indicates that the material of the fabric is very good and can effectively shield the radiation. 2.Conductivity test method: Radiation protection clothing and ordinary clothing fabrics are essentially different. Since metal fiber and silver fiber can conduct electricity, radiation protection suits are electrically conductive, while ordinary clothes are not electrically conductive. Bring your own multimeter, or take the radiation protection suit to the appliance maintenance department to check the conductivity of the radiation protection suit.
(1)Ordinary clothing detection The multimeter is adjusted to the 200Omega or 2KOmega position. When the multimeter pen is in contact with the test fabric and the distance is 10cm, the resistance value is 1 and the value of the multimeter when the object is not tested is 1, indicating that the ordinary fabric is non-conductive.
(2)Metal fiber testing The multimeter is adjusted to the 2kOmega gear position. When the multimeter pen is in contact with the test fabric and the distance is 10cm, the resistance value fluctuates around 0.421KOmega, indicating that the metal fiber radiation protection suit has conductivity, so it has anti-radiation effect.
(3)50% Silver fiber testing The multimeter is adjusted to the 200 Omega gear position. When the multimeter pen touches the test fabric and the distance is l0cm, the measured resistance value fluctuates around 1.1 Omega, indicating that the conductivity of the 50% silver fiber radiation protection suit not only is better than that of the metal fiber but also the radiation protection effect also better than metal fiber.
(4)100% Silver fiber testing The multimeter is adjusted to the 200 Omega position. When the multimeter pen is in contact with the test fabric and the distance is 10cm, the measured resistance value fluctuates around 0.4 Omega, indicating that the conductivity of the 100% silver fiber radiation suit is better than that of the 50% silver fiber fabric. The anti-radiation effect is also better. It can be seen from the test that the resistance value of 100% silver fiber is relatively small in the fabric, so the conductivity and anti-radiation effect of 100% silver fiber are also better. 3. Conductive test: The essential difference between radiation-resistant fabrics and ordinary fabrics is that radiation-proof fabrics are conductive and ordinary fabrics are non-conductive, so test the radiation resistance with a multimeter to see if it is effective.(If there is no multimeter at home, you can take the clothes to the appliance repair department, let the maintenance master test). 4.Professional radiation equipment test method: The first step: using radiation equipment to detect the host, radiation equipment will display the corresponding radiation value. The second step: use radiation suits to block the back of the chassis, in the middle of the radiation equipment and the rear of the host computer to block a layer of radiation protection suits, then see the display on the instrument value is 0, indicating that the host computer\’s electromagnetic radiation is radiated Clothing shielded.